“How much will chlorination cost?” is usually the first question a contractor or property manager asks us, and the honest answer is that it depends on the line. The good news is that it depends on a short list of things you already know: pipe size, footage, what happens to the discharge and how many samples your water purveyor wants.
Here’s what waterline chlorination typically costs in Southern California and what moves the price up or down.
The short version: waterline chlorination typically ranges anywhere from $900 to $2,800, depending on the size and scope of the work. A short run of small pipe sits at the low end; large-diameter mains, long runs and jobs that need dechlorination or extra sampling sit at the high end.
What Drives the Price
Pipe size and footage
These are the two biggest factors. Larger pipe holds more water and takes more chlorine, and longer runs take more time to fill, hold and flush. A few hundred feet of 2-inch service line costs far less than several thousand feet of 12-inch main.
Dechlorination
Chlorinated water usually can’t go straight to a storm drain or onto the ground in California. When the discharge has to be neutralized before it leaves the site, that adds equipment and time.
Lab samples
Each bacteriological sample has a lab fee. How many you need depends on the length of the line and your purveyor: AWWA C651 calls for sample sets along the main (roughly one per 1,200 feet, plus the end of the line and each branch), and some purveyors want two rounds taken 24 hours apart. Adding a heterotrophic plate count (HPC) adds lab cost and a 48-hour read. Samples dropped late in the week can also pick up weekend lab fees, so sampling Monday through Wednesday saves money.
Return trips
Chlorination, flushing and sampling are often done over two visits because of the contact time. If sampling has to happen on its own trip, that adds to the cost.
Schedule and labor requirements
Night, weekend and prevailing-wage work is quoted separately. So is same-day emergency service outside normal hours.
Site readiness
We need a place to inject chlorine and places to sample, such as a corporation stop or tap at each end of the line. If those aren’t in place, installing them is extra plumbing work.
Failed tests
If a sample fails, re-chlorinating and re-sampling costs extra. Good prep, like capped pipe ends, a pre-flush and clean sample taps, is the cheapest way to keep costs down. Here’s what causes failed tests and how to avoid them.
What Your Price Includes
- Chlorine injection to AWWA C651 or the plumbing code, with a monitored contact time
- Flushing the line back to normal chlorine levels
- Sample collection and delivery to a state-certified lab, with chain of custody
- A chlorination report ready for your inspector or water purveyor
When you compare quotes, check whether each one includes the sampling, the lab coordination and the report. A lower number that leaves those out usually isn’t lower by the end of the job.
How to Get an Accurate Quote
Send us these and we can usually price the job the same day:
- Job address and water purveyor
- Pipe size or sizes and total footage, including branches
- Whether the discharge needs dechlorination
- Sampling requirements from your purveyor or inspector, if you have them
- Your target date and whether the job is prevailing wage
We chlorinate water lines across San Diego, Orange, Los Angeles, Riverside and San Bernardino counties. Request a quote or see our chlorination service.
Related reading
- How long does waterline chlorination take?
- Commercial vs. residential chlorination: key differences
- New construction chlorination requirements in Los Angeles County
Need a waterline chlorinated or a backflow tested?
We chlorinate new and repaired water lines to AWWA C651, pull the bacteriological samples, and send you a purveyor-ready report. Serving San Diego, Orange, Los Angeles, Riverside and San Bernardino counties.